So here is the camera, actually I used two of them for this project, Corina's and mine.

So I wanted to mount one camera up front, I figured the grill was a good section to try out, so I put some zip ties on the camera.

Then strung some zip ties through the grill...

I had to make many adjustments...

Leveling it out took some work, it was tough.

I would wedge zip ties into between the camera and the grill in order to create some tension...

Then pull it into place and work it all in...

see...

This was a one time use zip tie mount in absolute terms, however it I built it out so that I could remove two zip ties and pull the camera out, while retaining the rest of the mount.